FASTER THROUGHPUT
MARKLESS INDEXING SYSTEM
DEDICATED JOINERY WORKSTATION
EXCHANGEABLE & VARIABLE INDEXING

 

 

DSCF2170DSCF2169

The Platform Riser is NOT required UNLESS your cabinet design uses an integral notched toe-kick. This accessory is an adjustable, flexible, Indexing Platform Riser, elevating your joiner to the exact height necessary to position your cabinet bottom flush with the toe-kick notch. It has 4 mounted levelers, so you can perfectly adjust the platform's height to each run of cabinet sides (the notch is likely to be just slightly different each time). The height range is about 3.75" to 4.5". For cabinets with a face frame front rail drop of another .75" or more, you can add a shim plate UNDER the  Platform Riser, and make your adjustments from there using your particularly calculated gauge bock, vs the supplied one that matches the template thickness.

The Platform Riser accepts mini-templates, laid out to match a given regular Vertical Template, giving you markless mortise-indexing for this type of cabinet. Three blank templates are included for you to lay out as needed.

If you can fit this item into your budget, it's very nice to have around when you need it. The Platform Riser comes with instructions on its set-up & use, for both framed and frameless cabinets, and there is a still-shot video under Videos on the Menu bar. 

#PRw4LV          $ 197 + shipping

loading...

Accessories

loading...
Go to top