FASTER THROUGHPUT
MARKLESS INDEXING SYSTEM
DEDICATED JOINERY WORKSTATION
EXCHANGEABLE & VARIABLE INDEXING

They're here--almost!!!!

Versidex is introducing two new compact versions of the MEGA-ncw. The smallest Versidex yet, the MINI 25 will handle 95% of kitchen cabinet sizes, up to 24.5" deep. The MINI 31 will also do that, PLUS will handle mortises into the front EDGES of panels up to 30.5", within the typical upper cabinets' heights, and just like the MEGA does. This capability comes into play with Lamello's Zeta P-2 joiner which can provide for snap-on face frames with the Tenso-14 connector (or using regular biscuits).

The best news is that they will sell for about HALF the cost of the big MEGA-ncw. The MINI 25 only weighs 70lbs. The MINI 31 is about 80 lbs. We have taken away the rolling base, the lower equipment shelf, the inflexion and convexity adjuster (now an accessory), blow gun and hose (accessory), vacuum hose/power cord handling D-ring (accessory), HALF of the platform length, half of the sides length, the end cap for pre-mortised acceptance of an extension table, the iVac power tool delayed-on-off unit, a lot of the decals, the melamine horizontal template (now MDF, which works better), the template noses are now white melamine over MDF instead of painted orange, and finally the pressure bar is now green, too, instead of orange. The MINI 25 is 6" narrower than the MEGA and MINI 31.

That's a lot of stuff, but you've been telling us you need a basic Versidex for smaller shops and/or the occasional user, so these answer that call. But now you will have to figure out how to set it up in your shop. Pricing will be published by March 22, and shipping will begin the first week of April. More details and more website updates & videos shortly! Be sure to check back!!!